VCT (vinyl composite tile) is an extremely popular and cost-effective option. When laying the tile, it’s essential to get precise measurement of the area in which the tile is to be. You will also need tape measures and VCT glue. Begin by placing your tile on an unfinished wall and square in the beginning. Do not glue the tiles yet. Place the tiles so the patterns alternate or straight together, based on personal preference. In order to allow for expanding and contracting, keep your tiles at least one quarter inch off the wall. Before cutting, plan the lengths of the tiles. In some cases, it is required to cut both ends or only one. Clean the floor thoroughly clean and scraping it until it is clean and dry. Put a small amount of glue, one row at a time. Set the starter tile close to the corner of the square wall. Press firmly on the tile in the middle and press it to the outside edges. Place the next one down and check that your seams line up. Repeat the process until you have completed the flooring. orhk3efv2d.